Black-decker 36070 Manual do Utilizador descarregar pdf

WOODWORKING TOOLS BY

BUlCKaDECKER

Cat. No. 36070

Sanding Frame

For the 4023 & 4024

ELU Belt Sanders

Instructions

Elil

WOODWORKING TOOLS BY

BIACK&DECKER

1. Turn Off And Unplug Sander.

2. Remove the front pivot bar from the sanding frame and

remove the hex nut, flat washer, pivot crank and spring,

(see Figure 1)

3. Insert the pivot bar through the sender FROM THE

RIGHT SIDE as shown in Figure 2. Examine the figure

closely to determine the position of the spring and flat

washer.

4. With the threaded end of the pivot bar extending from the

left side of the sander, re-install the spring, flat washer,

pivot crank and hex nut.

NOTE: Make sure that both

pivot cranks are positioned the same way. Tighten the nut

securely and make sure the pivot bar is free to rotate.

NOTE: The pivot bar is designed to rotate 90 degrees

from straight down to straight back.

5. With the pivot cranks straight down, insert them into the

frame in the pockets where they were before step 2

above. Be sure they snap below the balls in the pockets.

6. Rotate the back end of the sander down so that the

bracket on the sander fits over the rear pivot bar (make

sure it snaps firmly) NOTE: It may be necessary to move

the rear pivot bar into alignment with the bracket on the

sander. Move the bar by rotating the adjustment knob on

the rear of the frame, as shown in Figure 3.

7. The sanding frame is now properly installed. Adjust by

rotating the adjustment knob.

Black & Decker (U.S.) Inc., U.S. Power Tools Group, 10 North Park Drive, P.O. Box 798, Hunt Valley, MD 21030-0798 U.S.A.

157 04 00 05

Resumo do Conteúdo

Página 1 - Instructions

WOODWORKING TOOLS BYBUlCKaDECKERCat. No. 36070 Sanding Frame For the 4023 & 4024 ELU Belt Sanders InstructionsElilWOODWORKING TOOLS BYBIACK&DE

Modelos relacionados 4023 | 4024 |

Comentários a estes Manuais

Sem comentários

Black-decker 36070 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Máquinas de moagem Black-decker 36070. Black & Decker 36070 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados 4023 | 4024 |

Comentários a estes Manuais

Manuais e produtos relacionados com Máquinas de moagem Black-decker 36070