Black & Decker BDEDMT Instruções de Operação descarregar pdf (Página 4)

2_WARNING: ALWAYS use safety gJasses. Everyday eye gJasses are NOT safety

glasses. Also use face or dust mask if cutting operation is dusty.

ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CPA Z94.3),

• ANSI $12.6 ($3.19) hearing protection,

• NOSH/OSHA respiratory protection.

SYMBOLS

The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V .................. volts

Hz................ hertz

min .............. minutes

- - -. ............ direct current

@ ................ Class I Construction

(grounded)

[] ................ Class II Construction

(double insulated)

............ Readinstructionmanualbeforeuse

0 ................ Use proper eye protection

A ................... amperes

W.................. watts

, ................ alternating current

no ................. no load .speed

G. ................. earthing terminal

z_ ................ safety alert symbol

.../min or rpm...revo/utions or

reciprocation per minute

@.................. Use proper respiratory protection

0 .................. Use proper hearing protection

When using an extension cord, be

sure to use one heavy enough to carry

the current your product will draw. An

undersized cord will cause a drop in line

voltage resulting in loss of power and

overheating. The following table shows

the correct size to use depending on

cord length and nameplate ampere

rating. If in doubt, use the next heavier

gauge. The smaller the gauge number,

the heavier the cord.

Minimum Gauge for Cord Sets

VoJts Total Length of Cord in Feet

120V 0-25 26-50 51-100 101-150

(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)

240V 0-50 51-100 101-200 201-300

(0-15,2m) (15,2-30,4m)(30,4-60,9m)(60,9-91,4m)

Ampere Rating

More Not more American Wire Gauge

Than Than

0 - 6 18 16 16 14

6 - 10 18 16 14 12

10 - 12 16 16 14 12

12 - 16 14 12 Not Recommended

FUNCTIONAL DESCRIPTION

1. Forward/reverse slider

2. Variable speed trigger

3. Attachment release button

4. Bit holder 7. Torque adjustment collar

5. Drill/screwdriver attachment Double-ended bit tip (not shown)

6. Keyless chuck

1 2 3 4 5 6 7 8 9 ... 31 32

Comentários a estes Manuais

Sem comentários

Black & Decker BDEDMT Instruções de Operação Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Black & Decker BDEDMT