Black & Decker BDEDMT Instruções de Operação descarregar pdf (Página 7)

ON-BOARDBITSTORAGE

Abitstorageslot(4)isbuilt-intothehandleofthePowerUnitforeasybitstorageandaccess.

DRILLING

•Usesharpdrillbitsonly.

•Supportandsecureworkproperly,asinstructedintheSafetyInstructions.

•Useappropriateandrequiredsafetyequipment,asinstructedintheSafetyInstructions.

•Secureandmaintainworkarea,asinstructedintheSafetyInstructions.

•Runthedrillveryslowly,usinglightpressure,untiltheholeisstartedenoughtokeepthedrill

bitfromslippingoutofit.

•Applypressureinastraightlinewiththebit.Useenoughpressuretokeepthebitbitingbutnot

somuchastostallthemotorordeflectthebit.

•Hold the drill firmly with two hands to control its twisting action.

• DO NOT CLICK THE TRIGGER OF A STALLED DRILL OFF AND ON IN AN ATTEMPT TO

START IT. DAMAGE TO THE DRILL CAN RESULT.

, Minimize stalling on breakthroughby reducing pressure and slowly drillingthrough the last part of the hole.

• Keep the motor running while pulling the bit out of a drilled hole. This will help reduce jamming.

• Make sure switch turns drill on and off.

DRILLING IN WOOD

Holes in wood can be made with the same twist drill bits used for metal or with spade bits. These

bits should be sharp and should be pulled out frequently when drilling to clear chips from the flutes.

DRILLING IN METAL

Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should

be drilled dry. The cutting lubricants that work best are sutfurized cutting oil or lard oil.

Problem

• Unit will not start.

Troubleshooting

Possible Cause

• Cord not plugged in.

• Forward/reverse slider not fully

depressed in desired direction.

• Circuit breaker is tripped.

• Cord or switch is damaged.

•Attachment is not secured.

Possible Solution

• Plug toot into a working outlet.

• Push slider completely to

the left or right.

• Reset circuit breaker.

(If the product repeatedly

causes the circuit breaker

to trip, discontinue use

immediately and have it

serviced at a Black &

Decker service center or

authorized servicer.)

• Have cord or switch

replaced at Black &

Decker Service Center or

Authorized Servicer.

• Make certain the attachment is fully

pushed into the Power Unit.

For assistance with your product, visit our website www.blackanddecker.com for the location

of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the toot;

never immerse any part of the toot into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment (other than those listed in this manual) should be performed by authorized service

centers or other qualified service personnel, always using identical replacement parts.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comentários a estes Manuais

Sem comentários

Black & Decker BDEDMT Instruções de Operação Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Black & Decker BDEDMT