Black & Decker LCS120 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Motosserras elétricas Black & Decker LCS120. Black & Decker LCS120 User's Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 0
KEY INFORMATION YOU SHOULD KNOW:
DO NOT OVER-TENSION CHAIN. Refer to "ADJUSTING
CHAIN TENSION" for proper method of tensioning chain.
Retighten chain frequently during first two hours of use.
20V MAX* LITHIUM CORDLESS
CHAIN SAW INSTRUCTION MANUAL
*Maximum initial battery pack voltage
(measured without a workload) is 20
volts. Measured under a workload,
nominal voltage is 18.
Model # LCS120
Model Number LCS120
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Thank you for choosing Black & Decker! Go
to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING
THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your
Black & Decker purchase, go to
WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you canʼt find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri
to speak with an agent.
Please have the catalog number available when you call.
Vista de página 0
1 2 3 4 5 6 ... 16 17

Resumo do Conteúdo

Página 1 - CHAIN SAW INSTRUCTION MANUAL

KEY INFORMATION YOU SHOULD KNOW:• DO NOT OVER-TENSION CHAIN. Refer to "ADJUSTINGCHAIN TENSION" for proper method of tensioning chain.• Retig

Página 2

10PREPARING YOUR CHAIN SAW FOR USEWARNING: Read and understand all instructions. Failure tofollow all instructions listed below may result in electric

Página 3 - READ ALL INSTRUCTIONS

11• Place the saw on a firm surface. Rotate the two allen head screws(11) counterclockwise with the wrench (13) provided as shown infigure D.• To remo

Página 4

Chain OilingNOTES:- A high quality bar and chain oil or SAE30 weight motor oil should beused for chain and bar lubrication. Never use waste oil or ver

Página 5 - SAVE THESE INSTRUCTIONS

Switch• Always be sure of your footingand grip the chain saw firmlywith both hands with the thumband fingers encircling bothhandles.• To turn the tool

Página 6

felling back cut so enough wood is left to act as a hinge. The hingewood keeps the tree from twisting and falling in the wrongdirection. Do not cutthr

Página 7

• (Figure U) When supported at both endsFirst, cut 1/3 down from the top overbuck. Then make the finishedcut by underbucking the lower 2/3 to meet the

Página 8 - CHARGING PROCEDURE

3. (Figure X) Keep the correct topplate (24) filing angle line of 30°on your file guide parallel withyour chain (file at 60° fromchain viewed from abo

Página 9 - WARNING:

TROUBLESHOOTINGIf your Chain Saw does not operate correctly check the following:ProblemPossible Cause Possible Solution• Tool will notstart.• Unit wil

Página 10 - Replacing the Saw Chain

TABLE OF CONTENTSSafety Guidelines - Definitions...2Chain Saw Terms...

Página 11 - Adjusting Chain Tension

SAFETY INSTRUCTIONS ANDWARNINGS FOR CHAIN SAWS• Keep Work Area Clean -Cluttered areas invite injuries. Do notstart cutting until you have a clear work

Página 12 - Connecting the Battery

The following precautions should be followed to minimizekickback:(1.) Grip Saw Firmly. Hold the chain saw firmly with both handswhen the motor is runn

Página 13 - Common Cutting Techniques

Kickback Safety FeaturesWARNING: The following features are included on your sawto help reduce the hazard of kickback; however such featureswill not t

Página 14 - Limbing (figure R)

6COMPONENTSBefore using your Chain Saw familiarize yourself with all operatingand safety features.321561. Trigger Switch2. Lock Off Button3. Oil Reser

Página 15 - Saw Chain Sharpening

7• Do not use an extension cord unless it is absolutelynecessary. Use of improper extension cord could result in risk offire, electric shock, or elect

Página 16 - .025"

8CHARGING PROCEDUREThe standard charger provided will charge a fully depeleted batteryin about 8 hours.1. Plug the charger into an appropriate outlet

Página 17 - TROUBLESHOOTING

9Delay, suspending charging until the battery has normalized. Afterthis happens, the charger automatically switches to the PackCharging mode. This fea

Comentários a estes Manuais

Sem comentários